Téamh trealamh in an saotharlann % 2c díleá foirnéise

Téamh trealamh in an saotharlann % 2c díleá foirnéise

The digestion furnace adopts a well type electric heating method, which enables the sample to achieve better thermal effect when heated in the well type electric heating furnace, shortens the digestion and digestion time of the sample, and thus improves the detection speed of organic matter content determination such as protein. The heating element (module) adopts infrared quartz tube, which is resistant to strong acid and alkali, anti explosion, long service life, and meets CE standards. The characteristic is that the digestive tract has a large heating area, small temperature difference, good consistency in sample digestion, high thermal efficiency, and is conducive to sample digestion. The temperature control adopts a digital temperature controller, with accurate temperature control and fast heating. At the same time, harmful gases such as SO2 that overflow from the digestion tube are discharged into the sewer through the sewage collection pipe on the digestion furnace through a filtration pump, effectively suppressing the escape of harmful gases.

Díleá céimeanna de samplaí

Meáigh 0.3-1g of the sample that has been crushed and passed through 40-60 mesh/inch, and place it undamaged into a washed and dried digestion tube. Add water, catalyst, and 10mL of sulfuric acid.

1. Cuir an díleá feadáin isteach na poill de gach díleá raca % 2c ansin áit iad ar an díleáiteoir agus áit an séarachas píopaí le séalaithe fáinní ar iad.

2. Open the suction tee to allow water (tap water) to enter, so that the suction tee is in the suction state.

3. Ceangail an cumhacht arís% 2c cas ar an faoi seach rialú lasca % 2c rothlú an potentiometers % 2c agus coigeartaigh an léirithe voltas go 220V go go tapa díleá.

4. In the initial stage of digestion, attention should be be paid to observation to prevent the sample from splashing due to rapid heating (faoiseamh modh: it can be turned off for 5 minutes when digestion reaches splashing and then turned on again to continue heating).

5. Tar éis díleá% 2c an díleá feadán % 2c séarachas píopa % 2c agus an iomlán leantóir tá bogadh go dtí an fuarú raca le haghaidh fuarú . Aird% 3a Le linn an fuarú próiseas% 2c an séarachas píopa ní mór a bheith a choinneáil i an aspired stát (do not put an díleá píopa isteach uisce le haghaidh fuaraithe).

6. Prevent exhaust gas from escaping.

7. Tar éis an ionstraim tá úsáidtear % 2c líonadh isteach an úsáid agus cothabháil taifid.

Cothabháil agus cothabháil de díleá foirnéise

1. An téamh teocht de an díleá foirnéise níor chóir níos mó ná 500 céim chun cosc a chur damáiste do an ionstraim .

2. Nuair a tharlaíonn neamhghnácha feiniméin le linn an úsáid an díleá foirnéise % 2c an cumhacht ba chóir a bheith casta as in a am modh chun seiceáil an chúis de an mífheidhmiú.

3. Without the presence of a professional maintenance engineer, it is not allowed to dismantle the digestion furnace without authorization.

4. Éilíonn an cothabháil agus cothabháil de an díleá foirnéise a taifead le a bheith líonta amach.

Www.superbheater.com